The tire pressure monitoring system (TPMS) is a crucial feature in modern cars. It alerts the driver when the tire pressure is low or high, which can affect the vehicle’s performance and safety. Honda CRV is one of the popular SUVs that come with a TPMS. However, sometimes the TPMS may malfunction, and the sensor needs to be reset. This article provides a step-by-step guide on how to reset the Honda CRV tire pressure sensor.
To reset the tire pressure sensor on your Honda CRV, you need to find the TPMS reset button, which is usually located on the dashboard near the steering wheel. Once you have found the button, press and hold it for about 5 seconds until the TPMS light on the dashboard starts to blink or flash. Keep in mind that resetting the TPMS light should not replace regular tire pressure checks.
Before resetting the Honda CRV tire pressure sensor, it is essential to understand the TPMS’s basic operation. The system uses sensors mounted on each wheel to measure the tire pressure. If the pressure drops below the recommended level, the TPMS sends a signal to the vehicle’s onboard computer, which triggers the warning light on the dashboard. To reset the TPMS, the driver needs to follow specific steps, depending on the Honda CRV model and year. This article covers the most common methods used to reset the TPMS on Honda CRV.
Step by Step Instructions to Reset Honda CRV Tire Pressure Sensor
Locate the Tire Pressure Sensor
Before resetting the tire pressure sensor, you need to locate it first. In Honda CRV, the tire pressure sensor is located inside the tire valve stem. You can easily identify it by the small cap that covers the valve stem.
Press the Reset Button
Once you have located the tire pressure sensor, press the reset button. The reset button is usually located under the steering wheel. Press and hold the button until the tire pressure light blinks twice. This indicates that the system has been reset.
Monitor the Dashboard Light
After resetting the tire pressure sensor, monitor the dashboard light. It should turn off after a few minutes of driving. If the light does not turn off, there may be an issue with the tire pressure sensor or the tire pressure itself.
Check Tire Pressure
To ensure that the tire pressure sensor has been reset properly, check the tire pressure using a tire pressure gauge. The recommended tire pressure for Honda CRV is usually found on the driver’s side door jamb or in the owner’s manual. Make sure that all tires have the correct pressure.
Repeat Steps if Necessary
If the tire pressure light does not turn off after checking the tire pressure, repeat the steps to reset the tire pressure sensor. If the light still does not turn off, there may be an issue with the tire pressure sensor or the tire pressure itself. It is recommended to have the vehicle inspected by a certified mechanic.
Following these step by step instructions will help you reset the tire pressure sensor on your Honda CRV. It is important to ensure that the tire pressure is properly maintained to ensure safe driving and prolong the life of your tires.
The copyright owner of this article is Knowmyauto.com and was first published on Oct 6, 2023..
Signs Your Honda CRV Tire Pressure Sensor Needs Resetting
If your Honda CRV’s tire pressure sensor is not working properly, you may notice some signs that it needs resetting. Here are some common signs that indicate your Honda CRV tire pressure sensor needs resetting:
- The tire pressure warning light on your dashboard stays on even after you have inflated your tires to the correct pressure level.
- The tire pressure warning light flashes for a few seconds and then stays on.
- The tire pressure warning light comes on and goes off intermittently while driving.
- The tire pressure warning light does not come on at all when you turn on the ignition.
If you notice any of these signs, it is important to reset your Honda CRV tire pressure sensor as soon as possible. This will ensure that you have accurate tire pressure readings and can avoid any potential safety hazards on the road.
Resetting your Honda CRV tire pressure sensor is a simple process that can be done in a few easy steps. Follow the step-by-step instructions to reset your tire pressure sensor and ensure your safety on the road.
Troubleshooting Common Issues
Sensor Doesn’t Reset
If the tire pressure sensor on your Honda CRV doesn’t reset after following the steps outlined in the previous section, there are a few things you can try.
First, make sure that all the tires are properly inflated to the recommended pressure. If one or more tires are significantly underinflated, the sensor may not reset properly.
If the tires are properly inflated and the sensor still won’t reset, try driving the vehicle for a few miles at speeds between 30 and 60 mph. This may help to recalibrate the sensor and allow it to reset.
If neither of these steps work, it may be necessary to take the vehicle to a Honda dealership or other qualified mechanic to have the sensor reset manually.
Dashboard Light Remains On
If the dashboard light for the tire pressure sensor remains on even after the sensor has been reset, there may be an issue with the sensor itself or with the system that reads the sensor.
First, check to make sure that all the tires are properly inflated to the recommended pressure. If one or more tires are significantly underinflated, the sensor may continue to display an error message.
If all the tires are properly inflated and the dashboard light still won’t turn off, it may be necessary to take the vehicle to a Honda dealership or other qualified mechanic to diagnose and repair the issue.
KnowMyAuto is the sole owner of this article was published on Oct 6, 2023 and last updated on .
It’s important to address any issues with the tire pressure sensor as soon as possible, as driving with underinflated tires can cause reduced fuel efficiency, increased tire wear, and even a potential blowout.