Skip to Content

How to Reset Honda CRV Check Engine Light (How To)

Car owners understand that experiencing a check engine light on their Honda CR-V can be an unnerving experience. This light usually indicates that the vehicle’s engine management system has detected an issue requiring attention. Fortunately, resetting the check engine light on a Honda CR-V can be a straightforward process for those willing to take a few simple steps.

Before attempting to reset the check engine light, it’s essential to diagnose the problem causing the light to illuminate. This can be done by using an OBD-II scanner to retrieve any stored trouble codes.

Blue Honda CRV driving at night in city

An OBD-II scanner is a tool that helps car owners diagnose problems with their vehicles. It plugs into the car’s computer and can identify issues, letting you know if a warning light is serious or not. There are two types of scanners, handheld and wireless, and many cost less than $200. 😊

Once the issue has been resolved, the check engine light can be successfully reset, ensuring that it won’t light up again for the same problem.

Step-by-Step Process to Reset Honda CRV Check Engine Light

Honda CRV front cabin steering wheel

The steps to Reset a Honda CRV Check Engine light is simple and straightforward. First locate the OBD II port, connect an OBD II scanner, read and decode the error codes, and reset the check engine light.

Locating the OBD II Port

First, locate the OBD II port in your Honda CRV. It is typically found under the dashboard on the driver’s side, near the steering column or footwell. You may need a flashlight to easily spot it.

Connect Your OBD II Scanner

Next, turn off your vehicle’s engine and plug the OBD II scanner into the port. Once connected, turn the ignition key to the “on” position, but do not start the engine. Your scanner should now be powered on and ready to use.

Read and Decode Error Codes

Using your scanner, select the option to “Read” or “Scan” for error codes. It will display any stored codes on its screen. Take note of these codes, as they can help you identify the issue causing the check engine light to turn on. Look up the codes in your scanner’s manual or online for more details about the specific problems.

Example Error Code

Possible Issue

The copyright owner of this article is and was first published on Oct 2, 2023..


Multiple Cylinder Misfire Detected


Catalyst System Efficiency Below Threshold

Reset the Check Engine Light

Before resetting the check engine light, ensure that you have addressed the issue that caused it to turn on. Once you have resolved the problem, follow these steps:

KnowMyAuto is the sole owner of this article was published on Oct 2, 2023 and last updated on .

  1. With the scanner connected and powered on, navigate to the “Erase” or “Clear” codes option.
  2. Confirm your selection and wait for the scanner to reset the check engine light.
  3. Turn off the ignition and disconnect the OBD II scanner.
  4. Restart your Honda CRV to verify that the check engine light remains off.

By following this step-by-step process, you can successfully reset the check engine light on your Honda CRV. Remember, it is essential to address the underlying issues indicated by the error codes before resetting the light to ensure your vehicle operates optimally and safely.