Skip to Content

Toyota Venza Key and Key FOB Problems (How To Fix)

The Toyota Venza is a popular vehicle, known for its stylish design and reliable performance. But like any vehicle, it can experience key and key FOB problems that may leave you stranded or frustrated. In this article, we will explore the common causes of these issues and provide practical solutions to help you get back on the road quickly.

Toyota Venza parked outside in a park

One common problem you may encounter is a dead key FOB battery. This can leave you unable to lock or unlock your Venza, and may even prevent you from starting the engine. To fix this issue, simply replace the battery in your key FOB. Most key FOBs can be opened with a small screwdriver, allowing you to swap out the old battery for a new one. Be sure to consult your owner’s manual for the correct battery type and replacement process.

Another issue you might face involves a damaged or worn-out key. Over time, the metal can wear down, making it difficult to turn the ignition or unlock the door. In such cases, you might need to have a new key cut by a professional locksmith. Additionally, if the electronic components within the key or FOB are damaged, you could consider seeking assistance from your local Toyota dealership for repairs or replacement.

Toyota Venza Key Fob Battery

Battery Dead

One of the most common reasons your Toyota Venza key fob isn’t working is because the battery has died. With regular usage, these batteries generally last between 1-2 years. Luckily, replacing the battery is a simple and inexpensive fix.

To replace the battery, follow these steps:

  1. Remove the battery cover: Carefully pry open the key fob using a small flat-head screwdriver or a similar tool, ensuring that you don’t damage the casing.
  2. Remove the old battery: Once the cover is off, gently remove the old battery by lifting it out of its slot. Please note the orientation of the positive (+) and negative (-) sides of the battery.
  3. Insert the new battery: Place a new CR2032 3-volt lithium coin cell battery into the battery slot, ensuring that the positive (+) side is facing upwards.
  4. Reassemble the key fob: Put the cover back in place by lining up the two halves and pressing them together firmly.

After completing these steps, test the key fob by pressing any button to see if the issue is resolved. If it’s still not working, you may be facing a different problem.

Toyota Venza Key Programming

Before starting to program your Toyota Venza key, it’s essential to gather the required tools and follow safety guidelines. To begin programming, you will need the following:

  • A working, programmed Toyota Venza key
  • A new, unprogrammed key

Causes and Fixes

1. Low Key Battery

Cause: A common reason your Toyota Venza key might not work correctly is that the battery inside the key fob may be running low.

Fix: Replace the old battery with a new one. Ensure the new battery is placed with the correct polarity (+ and – signals matching).

Copyright protected article by Know My Auto and was first published on Jun 2, 2023. .

2. Damaged or Worn Key

Cause: The key may be damaged or worn, preventing it from engaging with the vehicle’s ignition switch.

Fix: Inspect your key for signs of damage and wear, and if required, visit a local dealership for a replacement.

3. Faulty Ignition Switch

Cause: The ignition switch in Venza might be faulty, resulting in the key not being recognized.

Fix: Consult with a qualified technician to diagnose and repair the faulty ignition switch.

Key Programming

After fixing potential issues above, you can begin the programming steps. Follow these instructions to program your key:

The copyright owner of this article is and was first published on Jun 2, 2023..

  1. Enter the vehicle: Sit inside the Toyota Venza, and close all doors and windows.
  2. Insert the working key: Place the working, programmed key into the ignition.
  3. Turn: Turn it to the ‘ON’ position without starting the car for 5 seconds, then back to the ‘OFF’ position. Remove the key from the ignition.
  4. Insert the new key: Within 10 seconds, insert the new, unprogrammed key into the ignition.
  5. Turn: Turn it to the ‘ON’ position without starting the car. The security light should now blink for 15 seconds, indicating that the key programming process has started.
  6. Wait: Keep the key in the ‘ON’ position until the security light stops blinking.
  7. Turn off: Turn the new key to the ‘OFF’ position and remove it from the ignition.
  8. Test: Start the Toyota Venza using the newly programmed key to ensure the programming was successful.

Remember always to consult your Toyota Venza owner’s manual for more detailed information on key programming and troubleshooting.

Toyota Venza Key Issues

Key Won’t Turn

One possible cause for your Toyota Venza key not turning in the ignition could be a worn-out or damaged key. In this case, try using a spare key to check if it works better. If the spare key works, the problem likely lies in your primary key, and you may need to have a new one cut.

Another possible cause is a jammed or dirty ignition lock cylinder. Dirt, debris, or an accumulation of grease can make it difficult for the key to turn. To fix this issue, try using canned air or a small brush to clean out the lock cylinder. If the problem persists, you might need a mechanic to examine and repair the lock.

Key Fob Not Working

If your Toyota Venza key fob is not working, there are several potential causes and fixes:

  1. Battery issues: The key fob’s battery may be low or dead. To resolve this, replace the battery with a new one. Consult your owner’s manual for instructions on how to change the battery.
  2. Signal interference: Electronic devices, metal objects, or other key fobs might cause interference. Move away from the source of interference and try using your key fob again.
  3. Faulty or damaged key fob: If your key fob is still not working after trying the above solutions, it may be faulty or damaged and require repair or replacement. Contact your Toyota dealer for assistance.

Key Not Detected

A Toyota Venza key not being detected by the vehicle could be caused by:

  1. Battery issues: A low or dead battery in the key fob can lead to signal problems. Replace the battery and see if the issue is resolved.
  2. Key fob or vehicle communication failure: Reestablish the connection between your key fob and vehicle by following the reprogramming steps in your owner’s manual.
  3. Faulty key fob: If the key fob is still not detected after trying the above solutions, it may be faulty and need repair or replacement. Contact your Toyota dealer for help.

Related Articles

Toyota Venza Alarm Keeps Going Off (How to Fix)

Toyota Venza Trunk Won’t Open (How to Fix)

Toyota Venza Bluetooth Is Not Working

Toyota Venza Door Won’t Unlock (How to Fix)

Toyota Venza Radio Won’t Turn On (How to Fix)

KnowMyAuto is the sole owner of this article was published on Jun 2, 2023 and last updated on .

Toyota Venza Radio Not Working (How To Fix)