Skip to Content

How To Reset Honda Civic Functions

If you have a Honda Civic, you already realize that it is one of the best cars on the road these days. There are many reasons to love your Honda but that doesn’t mean it is without problems. At times, you may even find that you need to reset your Honda Civic. How can you do it properly?

To fully reset your Honda Civic you will press your engine start button two times. Make sure you don’t have your foot on the brake because you don’t want the engine to start. This will put you in accessory mode and then you can navigate through to Settings/Vehicle/Maintenance and reset all items.

Car mechanic looking at clipboard

People try to reset the settings and lights on their Honda Civic for a wide variety of reasons. We will discuss many of them below and sometimes, it is better if you are more selective with your choice.

After all, when you reset all of the settings in your Honda Civic, it will take you back to a factory setting. Anything that may have been changed for your specific vehicle will be reset and will need to be set again.

How To Reset Honda Civic Functions

There are also times when you may need to reset the ECM, which is the engine control module. This is the computer that allows your vehicle to operate. It is a part of most, if not all newer vehicles and from time to time, it will need to be reset.

Think of it this way. When was the last time your computer at home was not working properly? What did you do in order to reset the computer? You turned it off and turn it back on again.

Something similar may need to be done with your Honda Civic. Although this is more of an extreme measure because it takes you entirely back to factory settings, it can be of benefit.

The basic way that you reset the ECM and therefore, reset your Honda Civic settings is to disconnect your battery and then disconnect the ECM fuse. After waiting a few minutes, you can reconnect things in the opposite order.

The ECM will be reset to factory settings but it is not going to automatically operate the vehicle as if it were brand-new. In fact, you may need to let the car idle for 10 minutes or longer while the interior computer learns the vehicle again.

There are various things that will need to be reset in order to optimize your Honda Civic. This could include fuel mixtures as well as other features, which may be different from year to year and from vehicle to vehicle.

At any rate, resetting your Honda Civic is not something that should be taken lightly. If it is necessary, it is not difficult to do. Just make sure it is needed before you do it.

How To Reset Honda Civic Oil Life

Car oil light indicator on

One of the conveniences of modern vehicles is the oil life indicator. What can you do to reset the Honda Civic oil life indicator and percentage?

It is simple to reset the oil life indicator in a Honda Civic. Hold down the TRIP knob, which is on the instrument panel until you are on the screen that displays the oil engine life. At that point, press and hold the TRIP knob for a few seconds. The oil life will blink and eventually, will be back at 100%.

Although it is possible to reset the engine oil life, it is not always the best option. It is something that should only be done after the oil has been changed so you can track the oil life until it needs to be changed again.

Some car owners feel that it is important to get rid of the blinking lights and low numbers because they are planning on having the oil changed soon. Don’t make that mistake. As they say, out of sight, out of mind, and if the light is no longer warning you, you may just forget to have the oil changed.

You can think of the oil as being the lifeblood of your Honda Civic. Make sure you change it regularly when indicated by the system and your vehicle will last for a long time.

How To Reset Honda Civic Radio

One of the features that many of us appreciate about our vehicle is the radio. What do you do if you need to reset the radio in your Honda Civic?

The most common method of resetting a Honda Civic radio is to disconnect it from power and then reconnect it again. You can do this by disconnecting the battery. You will then hold the power button in until a screen appears and asks you for a code. The code is specific to the radio and can be found by doing an online search.

Unfortunately, many of the radios that are installed in Honda Civics are different from one year to the next. You might also get a radio that is part of a special package.

There is not a single way that works for every type of radio and sometimes, you need to do some extra research to find a code or perhaps a method of resetting it.

For the most part, however, disconnecting the power and then holding in the power button will get you started on the right path.

How To Reset Honda Civic Maintenance/Service Light

Car maintenance light indicator on

Is the maintenance or service light on in your Honda Civic? Resetting it is not difficult.

You can reset the maintenance light in most Honda Civics by holding in the TRIP button and then turning the ignition on. As you continue to hold in the TRIP button, the maintenance light will eventually turn off. You can then turn the car off again and the reset is finished.

Although it is relatively easy to turn off the service light in a Honda Civic, it is not something that should be done as the first line of defense. In many cases, the service light comes on to alert you of a problem.

Turning off the service light may mean that it will simply come back on again when the problem is detected. It might also keep you from having the problem fixed, leading to some disastrous consequences.

How To Reset Honda Civic ECU

The ECU in your Honda Civic is the internal computer. It can be reset, just like your home computer can be reset.

To reset the ECU in your Honda Civic properly, you should be working with an engine that is properly warmed up. You may need to drive the car for a few minutes, or perhaps around the block. At that point, you can turn the car off and remove the ECU fuse. After reinserting the fuse, start the car and let it idle for 10 minutes.

When you reset the ECU fuse in this way, you are taking things back to factory settings. It has many benefits, but it is not without its possible problems as well.

Things that may have been set over time to allow your vehicle to run properly, such as fuel mixtures, are going to be reset to factory settings as well. That is why you need to allow the vehicle to idle for 10 minutes while the settings are reestablished.

How To Reset Honda Civic Alarm/Anti Theft

Car mechanic holding wrench

If the antitheft system in your Honda Civic is not working properly, it can be reset.

Reset the security and antitheft in your Honda Civic by locating the reset button and depressing it for a few seconds. This should be done while the key is in the ignition and in the accessory position. At that point, the alarm should reset and the problem should be resolved.

Sometimes, the alarm system may malfunction because of a problem with the vehicle. At other times, it may be an accessory that we add to the car.

If you add something to your Honda Civic and the alarm starts malfunctioning, try removing the third-party product and see if it helps.

How To Reset Honda Civic AC

If the AC in your Honda Civic is no longer working, is it possible to reset it?

There is no AC reset button on a Honda Civic. In most cases, it will be necessary for you to have the HVAC serviced. It could be a problem with the wiring or in some cases, it may be the compressor.

If you want to try every possible fix before you take it to a dealer, you can always try resetting the internal computer.

After warming up the vehicle, turn the ignition off, remove the ECU fuse, and re-insert the fuse after a few minutes. Start the car and allow it to idle for 10 minutes.

How To Reset Honda Civic Screen

Hand pushing button on car touchscreen

Is your Honda Civic screen giving you problems? Here is a way to unfreeze it.

For the most part, you can reboot the Honda Civic screen by rebooting the system. This is done by turning the power on and then holding down the power button for a few seconds. As you continue to hold the power button, you will see a screen come up that asks you to reboot. Select yes.

If no screen comes up to ask you if you want to reboot, it may reboot on its own. This is an automatic feature put into some models, but it is not available in all models.

After the screen reboots, it should be working fine. If not, you can try rebooting the ECU by removing the fuse and putting it back in again.

How To Reset Honda Civic Low Tire Pressure Light/TPMS

The low-pressure light in your Honda Civic may continue to stay on, even if the tire pressure is fine.

The easiest way to reset the tire pressure light in your Honda Civic is to scroll through the home screen to your settings. Select vehicle and then TPMS calibration. Once you calibrate the tire pressure monitoring system, it will be set to the current tire pressure.

Not every Honda Civic is going to have this option available. In some models, there may be a single button on the dashboard associated with the tire pressure monitoring system.

If that is the case, begin with the car running and in park. Press and hold the button until the light flashes on the dashboard and eventually turns off. The system has now reset.

How To Reset Honda Civic Bluetooth

Car radio Bluetooth controls

Bluetooth is a very convenient feature found in most newer vehicles. There are times when it may need to be reset, and it can be done in your Honda Civic.

The easiest way to reset Bluetooth is to remove all devices connected to the vehicle. Scroll through your settings to Bluetooth and remove those devices one at a time. You can then re-add the devices as necessary.

There are a number of reasons why you may need to reset Bluetooth in your Honda Civic. Sometimes, it will not pair with new devices or you may have it unpair your current device.

Copyright protected article by Know My Auto and was first published on May 26, 2022. .

In any case, removing the device from the Bluetooth settings and starting from scratch is the first and best choice.

How To Reset Honda Civic Trip/Miles Odometer

One of the convenient features that you have on your Honda Civic is a trip odometer. It can help you to keep track of trips, both large and small. How can you reset it back to zero?

The easiest way to reset your trip odometer is to hold in the TRIP button on the dashboard until you see the screen with the trip odometer displayed. Press and hold the TRIP button for a few seconds and the trip odometer should reset to zero.

Although it is possible to reset a trip odometer, it is not possible to reset a regular odometer. In fact, resetting the regular odometer would be illegal.

If you are having problems with your regular odometer, you may need to take it to a dealer to have it fixed. Otherwise, you can try resetting the ECM by disconnecting the battery and removing the ECM fuse for a few minutes.

How To Reset Honda Civic Check Engine Light

Car check engine indicator light on

Are you trying to reset the check engine light in your Honda Civic? It is possible to do it.

The easiest way to fix a check engine light and reset it so it is no longer on is to reset the ECU. After warming up the vehicle, turn it off and disconnect the battery. You can then unplug the ECU fuse, wait for a few minutes and then re-insert it. Reconnect the battery and start the vehicle. Allow it to idle for a few minutes.

Resetting the internal computer in your Honda Civic may indeed turn off the check engine light. That being said, it is not always the best option for doing so.

The check engine light comes on for a wide variety of reasons but it all has to do with the car not running properly. It may be a problem with emissions or it could be a severe problem, such as overheating.

Anytime the check engine light comes on, it is best to get to the root of the problem and solve it. Turning the light off may remove the annoyance but it will not remove the problem.

How To Reset Honda Civic Abs Light

If your brake system light is on, is it possible to turn it back off? Honda Civics make it possible.

The best way to turn off your Honda Civic ABS light is to disconnect the ECU. This is done by warming up the vehicle, disconnecting the battery, and then removing the fuse to the ECU. You can replace the fuse after a few minutes, reconnect the battery and start the vehicle.

Resetting the ECU is going to reset everything back to factory settings. This includes the ABS light, which may have been on inappropriately.

It is also important to make sure that you don’t have a problem with your brakes. In some cases, the ABS light is warning you of issues that need to be resolved or you could lose your brakes.

How To Reset Honda Civic Key FOB

Closeup of Car Key Fob

If you have to reset your honda civic key fob, there are specific ways to do so.

1. Turn the ignition on

2. Press the lock or unlock on the transmitter

3. Turn the ignition off

REPEAT 3 TIMES

When you press the lock or unlock on the transmitter after doing this several times, you will hear the lock actuators. That means that your key fob is now reset.

The copyright owner of this article is Knowmyauto.com and was first published on May 26, 2022..

You can also reprogram another two transmitters within 10 seconds by pressing the lock or unlock buttons on them.

How To Reset Check Emission System Honda Civic

Some Honda Civics have an emission light. If yours is on, can you turn it off again?

Both the emissions and check engine light can be turned off on a Honda Civic by rebooting the internal computer. This is done by warming up the vehicle and turning it off. Disconnect the battery and pull the fuse for the ECM. After re-connecting things and starting the vehicle, allow it to idle for 10 minutes.

If the emission light is on in your Honda Civic, it means that there is a problem with the engine. Typically, it means that fuel is not being burnt properly because there is a misfire.

Regardless of whether it is a problem with your engine or the emissions, it is not something to take lightly. Those lights are designed for a purpose and turning them off without fixing the problem could lead to further problems.

You can reset your Honda Civic back to factory settings by resetting the internal computer. Warm up the vehicle, turn it off, and disconnect the battery. Remove the fuse for the ECM and wait five minutes before plugging it back in again. Reconnect the battery, start the vehicle, and allow it to idle for 10 minutes.

Related Articles

Honda Civic Tire Pressure Light Troubleshooting

Honda Civic USB Port Not Working

Honda Civic Airbag System Problem

Honda Civic Speakers Not Working

KnowMyAuto is the sole owner of this article was published on May 26, 2022 and last updated on .

Honda Civic Radiator Fan Not Working (How To)